When we newly installed our portable dishwasher, the hose didn’t reach the plumbing area. As a result, we couldn’t run it instantly.
One day, one of our friends suggested using a portable dishwasher hose extension. And we thought, well, how come we didn’t think of it before?
We researched the hose extension and got so much information that would help us if we knew it before. If you are wondering what it is exactly, let us give you a brief!
What Is A Portable Dishwasher Hose Extension?
Like the name sounds, a portable dishwasher hose extension is used for the extra reach that the regular hose fails to provide. Sometimes, your home’s plumbing area might not be easy to reach when the dishwasher’s hose is short in length. That’s when the hose extension comes in handy.
These extensions help to cover the extra distance while providing greater flexibility and convenience in setting up their dishwasher in different locations or dealing with specific plumbing configurations.
You can use the hose extension even when the drain outlet of the dishwasher is not conveniently located near the sink. It helps to connect the dishwasher to the drainage system. Moreover, if you want to move your dishwasher to a new location, the hose extension will help you there too.
How To Connect A Portable Dishwasher Hose Extension?
Connecting a portable dishwasher hose extension is not rocket science. You can do it on your own by following these steps:
Step-1: Gather The Required Tools
First things first, you will need a portable dishwasher hose extension, a hose coupler, hose clamps, and a screwdriver to attach the hose extension to your dishwasher.
Step-2: Disconnect The Dishwasher
To prevent yourself from getting electrified, make sure that you have disconnected the dishwasher from the power source.
Step-3: Prepare The Default Hose
Now, prepare the attached hose that comes with your dishwasher. Make sure that it is free of any dirt and debris so you don’t face any clogs afterward. If you notice any uneven texture, cut the hose to a good point to attach the extension.
Step-4: Connect The Hose Coupler
While using a hose coupler to connect the extension, you need to attach the coupler first. You have to slide the coupler into the existing hose and place it firmly so it doesn’t create any leaks.
Step-5: Connect The Extension Hose
Now, take the other end of the hose coupler and secure it firmly with the hose extension. However, if you haven’t used any coupler, you have to connect the extension directly to the end of the existing hose of your dishwasher. Make sure the connection is firm and stable so it doesn’t leak anything afterward.
Step-6: Secure And Test The Connection
If you are using any hose clamps, you have to place them over the connection points and tighten them using a screwdriver. Then, run an empty cycle in the dishwasher or manually run water through the hose to check for leaks.
Tips To Connect The Dishwasher Hose Extension Properly:
Here are a few tips to follow so you can ensure that the connection is properly secured and you don’t face any trouble afterward:
- Before attaching the hose, carefully measure the diameter of your existing hose and the distance that you want to cover. You will need the correct size to match your existing hose and the correct length to reach your desired location.
- If you want to prevent leaks, you need to pick the right size of connectors that are designed for use with dishwasher hoses.
- Before you start, you must prepare the hoses to make them debris free. Otherwise, you will face clogs and you will need to clean them again after the installation.
- If you notice that connecting the hoses seems to be difficult, try using a bit of lubricant to lubricate the convention points. This will be helpful to secure tight-fitting connectors.
- After the installation, thoroughly check for leaks. Also, check if there is any damage or bends in the hose that may cause leaks in the future.
Why Do You Need A Dishwasher Hose Extension?
The usual hose that comes with the dishwasher might not be able to match everyone’s demands. Sometimes, they fall short depending on the plumbing area. So, a hose extension helps to extend the hose’s reach even if the water source is located far away from the desired dishwasher location.
Also, you can relocate your dishwasher wherever you want, which is a big advantage that these portable hoses provide. You will get more flexibility in kitchen layout and appliance placement. Especially, when the existing plumbing setup doesn’t align conveniently with the dishwasher location.
Dishwasher hose extensions also help people who often relocate their locations. Moreover, if you are planning to travel for extended days, you can use your dishwasher anywhere without worrying about the plumbing requirement.
Frequently Asked Questions (FAQs)
1. Can I extend a dishwasher hose?
The existing dishwasher hose may be extended up to a certain distance. But if you need more length, you need to consider getting a hose extension.
2. Can a hose be extended?
Yes, you can extend the existing hose if you attach a hose extension to it. The extensions provide extended functionality to reach your desired area easily. Hereby, the installation process is also as easy as a piece of cake.
3. Should the dishwasher be close to sink?
It’s better if your dishwasher is close to the sink. It helps to connect the dishwasher hose effortlessly. However, even if you can’t ensure close proximity, you can always use a hose extension.
4. What is an expandable hose?
An expandable hose can be expanded to your desired location. You can also shrink them when your work is over. They especially help when you have limited space.
A portable dishwasher hose extension comes in handy in many situations when you might think of changing your kitchen layout. However, make sure you get the right size that matches your dishwasher hose. Also, if you fail to install it on your own, it’s better to call out for help from an expert.